Our Experience

Project Management, Project Co-ordination, Project Execution, Engineering services.
Implementation of Systems and procedures suitable to clients and handling project tasks right from execution stage up to finalization.
Experience in maintaining quality standards of material and finishes to ensure execution as per design specification.
QA/QC Inspection and verification of the various E&I construction activities in accordance to project specifications.
Witness several of E&I tests. Preparing, arranging, and attending the client’s inspections and audits/walk down for certifications. Prepare all QA/QC reports.
Preparing, arranging and attending the client’s inspections and audits for certifications.
Field Inspection and verification of the various Electrical construction activities like Below Ground/Above Ground Cabling, Installation, Cable terminations & Earthing system of Panels, PCC, MCC, Transformers, Generators, Motors, Distribution systems, Heat tracing, Lighting, cable trays etc in accordance to approved drawings, specifications, Quality control procedures.
Field Inspection for instrumentations construction activities like Instrument site calibration, installations of control valves and transmitters (pressure, temperature, flow, level). Installations of JBs and Impulse tubing, PDB, DCS, FGS, FOC, Telecom cabinets & primary and secondary cables, witness for pressure tests, loop tests etcs., as per project requirements and according to specifications.
Conducting Receiving inspections.
Verify calibration certificates of all measuring instrument. Check if all are in operational & calibrated condition.
Co-ordinates with client for inspection & stage wise activities for witness / hold point.
Electrical Project Execution, Estimation, Supervision, Billing, Site Planning, testing, commissioning and updating SAP records of Turnkey electrical Projects.
Out Sourcing, Production Planning, Vendor development, Contract manufacturing, Vendor Audits, Material management, Process control, Purchase scheduling of various products required to manufacture or process final product in the field of Chemicals, Stationary, Automobile parts, Adhesives, stickers, scotch brites etc.
In house inspections & Testing of LV/MV switch gear/MCC & Power Panels and inward electrical and electronics components.
Material receiving inspection for all types of Electrical Equipments and components.
Inspecting, Verifying and testing inward electrical equipments like: ACB, Switches, Contactor, Relays, Transformers, Meters, Transducers, Cables etc., as per ISO procedures.
Inspecting and testing Electrical Panels PCC, MCC as per GA, SLD and schematic control drawings.

Conducting HV and IR tests for various electrical equipments.
Verifying the components, Manufacturer’s Test Certificates etc., referring to the IS standards.
Preparing Inspection Reports using Oracle Data Base as per project requirements.
Coordinating in customer/client inspections.
Preparing Quality Assurance Plans, NCR, CR, Preventive & Corrective actions report.
Preparing for Audits for certification from clients and external auditors.
Clearing and closing the audit findings and corrective actions if any.
Maintaining and Monitoring the 66KV Receiving Station and 11KV SubStations.
LT works including design, wiring and rectification.
Knowledge of Transformer Protection and maintenance of VCB’s.
Knowledge of 11KV XLPE Cable joining. (Straight Joint and Tee Joint).
Electrical Estate Maintenance (Out side the factory).
Estimation of the Electrical Projects.
Preparing presentation using M.S Power Point.
Selecting electricians/technician from the field and training them for QA/QC inspector E&I for one year on site. The training manual is written by me and is approved by the general manager.
Writing/reviewing/revising quality manual/ procedures manual as per ISO-9001: 2015.
Writing/reviewing/revising work instructions/procedures, inspection & test plans (ITPS) & method statements for different departments/projects/vendors/subcontractors and suppliers as per ISO/client/project requirements.

Preparing annual audit plan for all the departments of the organization, project sites, suppliers and subcontractors.
Preparing/reviewing/revising project quality plans as per ISO-9001: 2015 & client requirements for all the sites.
Conducting internal audits in H.O./project sites, second party audits on suppliers and subcontractors to make sure they meet the ISO/company requirements.
Preparing/issuing audit reports. Preventive & corrective actions based on audit findings.
Preparing for and facing third party audits from certification body (SGS) and from clients. Following up with the corrective actions and follow-up audits if any.
Preparing project quality plan for the projects and maintaining the approvals & revisions.
Conducting quality review meetings to highlight the compliments and comments of clients & audit findings to senior management. Preparing preventive/corrective actions as per Project manager’s instructions.
Conducting quality induction to all the new arrivals to the organization.
Conducting training programmes on quality to all the employees.
WPS/PQR reviewing/qualifying, Welders qualification and related procedures..
General requirements and interface with the departments for quality issues.
Maintaining the calibration register of the mite (measuring instruments and test equipments), and its traceability.
Maintaining international standards and its logs.
Visits to project sites on regular basis.
Preparing/reviewing/revising inspection test plans for the projects.
Attending weekly progress meetings & QA/QC review meetings with client.
Preparing weekly schedule for the QA/QC inspections.
Setting up QA/QC system and maintain it at all the projects sites as per ISO requirements.
Conducting weekly internal co-ordination meeting with all the inspectors and QA/QC staff and preparing action plan for the project activities.
Monitoring the progress of the project and documentation updation.
Interacting with project manager and highlighting the short falls in the qa/qc system if any to the project manager and taking preventive/ corrective actions accordingly.
Conducting weekly meetings with the subcontractors/suppliers to assure the project quality requirements are achieved.

Preparing weekly look ahead programme for the ongoing activities of the project and scheduling the inspection requirements.
Preparing and implementing the weekly look ahead programme in line with the procurement programme to monitor the inspections and activities in the vendor premises like routine visits, audits and FAT before packaging and shipment.
Third party inspection/Client management for the WPS/PQR & welder qualifications for the projects.
Third party/client management, coordination and scheduling of inspections for the FAT and other visits in vendor/supplier and subcontractor premises.
Inspection management both at site and at vendor/supplier premises.
In Kentz we have developed an In-House project monitoring system. The system is known as CCMS (Construction & Completions Management System). For Qatar this system is being used for the first time. To run this system it requires extensive Knowledge of all the disciplines, all the departments and excellent communication skills. The system runs on the inputs from construction ( Daily progress reports, Action Delays, Holds, Manpower mobilization & Demobs, Site Notices, Scope changes etc. ), Quality( Inspection Requests, Audit schedules, Punch Lists, Field Trouble reports, NCRs, Inspection Reports etc. ), Planning, Commercial, Loop Checking & Commissioning Departments.
CCMS Team interprets & captures the data on a daily basis. Monitors the changes and updates on a daily basis to keep the system up to date.
We held the authority to accept or reject the data provided by different departments if it is not in accordance with the system requirements. Also all the rights of the system execution. Generating daily reports, interpreting the system for the up gradation. Monitoring and guiding the team of data in putters so that the right information is fed in to the system.
Maintaining all the documentation used as input to the system.
We Prepared hand over dossiers as per the approved Index by client.
We Maintained high level of traceability throughout the project to ensure all the information is in right place and traceable.
As QA/QC MANAGERS we holds the responsibility of carrying out inspections at site and generating documentation in accordance with Client's take over system (I-CAPS).
Once inspection reports are signed inspectors shall handover the reports to CCMS & Turn Over Department to update the system and to store the documents.
The CCMS & Turn Over department manages all the documents as per the handover structures approved by the client. Managing and maintaining all the documents in a highly traceable manner and finally handing over the Pre- commissioning and commissioning folders as per priority and completion dates.
We are capable to shoulder the responsibilities of QA/QC Manager for a company head office and/or on multi discipline projects.
We are capable to work as an instrumentation design engineer.
We are capable to shoulder the responsibility of a lead construction manager for multidiscipline project to lead a team of professionals of different disciplines.
We are capable to shoulder the responsibility of lead commissioning engineer.
We are capable to shoulder the responsibility of a procurement engineer.
We are capable to shoulder the responsibility of QA lead auditor for a multidisciplinary engineering organization.
We are capable to shoulder the responsibility of Turnover Manager for a multidiscipline Project.

™

Our Experience

Important Links

Reach Us

Our Partners